Wholesale replica watches, fake luxury phones.
Guarrantee lowest price and highest quality.
Reliable and trustworthy replica watch wholesaler.
Watchvv help you to save money

1, About the Quality of our Watches
What is a replica watch and how is it different from the real watches?
A replica watch is a watch made similar to that of the real brand ones, except, at a much lower cost. A real Rolex can go up to hundreds of thousands of dollars, but you can get a replica similar to that one, for only a few hundred dollars. This allows the normal everyday person to be able to look and feel classy, without having to actually spend such ridiculous amounts of money on it.
2, What is Automatic Movement?
A watch whose mechanism is fitted with a device, that automatically winds the spring by using the force of gravity. An automatic is a mechanical watch whose mainspring is wound as a result of the wearer's arm motion. The movement of the wrist and body causes the rotor, a metal weight attached to a winding mechanism, to pivot freely on its staff in the center of the movement. The rotor rotates back and forth in a circular motion at the slightest action of the wrist. The rotor's movement winds the mainspring, a flat coiled spring that powers mechanical watches. Rolex refers to its automatic watches as 'perpetual.' Automatic, self-winding and perpetual all mean the same thing: the watch winds itself. Many people appreciate the craft involved in making a mechanical automatic movement. They like the fact that this technology is hundreds of years old, involves many moving parts, and yet keeps very accurate time. (Many automatics come with glass backs which enable the wearer to view the action of the rotor and other moving parts.) They appreciate the human element involved in an automatic watch, that the movement is assembled by hand. Others like the fact that automatics run on so-called 'clean,' natural energy wrist power. A person's normal arm and wrist motion will keep an automatic watch properly wound. If you haven't worn an automatic in a while, it is best to wind the stopped watch before putting it on. Ten to 15 turns of the crown is usually enough to give full power to the mainspring.
3, Are the leather bands real leather?
Yes, all watches that come with leather bands are 100% genuine leather
4, What is meant by automatic, chronograph, and quartz?
Automatic, or self-winding, means the watch has a self-winding mechanism which allows it to run on its own without batteries. The advantage is batteries are not required. The disadvantage is they should be serviced every few years to make sure they run smoothly. Chronographs are the little dials (or 'clocks') which appear within the watches themselves and are always fully functional on our watches. They are normally used as stopwatch timers. Quartz means the watch runs on a battery. One disadvantage is, they normally have fewer markings and details than self-winding watches, and you have to change the battery every so often.
5, What is meant by sweeping second hand, and which watches have it?
A sweeping second hand simply means that the second hand sweeps smoothly instead of ticking once every second. Basically, it is just a bunch of very small, rapid, tiny ticks combined that makes it look like it is sweeping smoothly. All automatic watches have a sweeping second hand, and all battery-run (quartz) and chronograph watches have a ticking second hand.
6, How do I set time?
To set time, you need to turn button in anti-clockwise direction if you have a screw-in lock watch. You need to softly pull the button out a little bit. The best way to do this is to use first and second finger and use finger knuckle as a lever in order to pull the button out with as little force as possible. You can feel a little 'click'! Now you can set the time by turning it anti-clockwise. This would turn the minute-hour hands forward until you set the right time. When time is set, push the button back and turning the button clockwise for a few rounds.
7, I have a watch with a date, how do I change the date?
To change date and time you need to do the following. If you have a screw-in button like Rolex, you need to turn the button anti-clockwise for a few rounds until the button is loose. Then you need to pull the button out softly by using your thumb nail and first finger nail, softly and without force. You should feel a 'click' here. There are two steps when you pull the button out. The first step is for setting the date (and Day if you have a Rolex Day-Date). The second step is for setting the local. You can only set Date forward by turning button in one direction. When you are done with setting date and time, push back the button and wind it clockwise for a few times. No need to lock it.
,
Copyright www.watchvv.com All Rights Reserved Powered By:100 PercentMSN: watchvv@hotmail.com Email: Watchvv@watchvv.com
